back

Twin-Tremolo

European Union (incl. VAT) : 265 €

Worldwide (outside EU) : 239 €
USA : 265 $

Worldwide free shipping!
 
Order directly by email:
support@vahlbruch-fx.com

 
Please include your shipping address
in your mail. I will respond with an order acknowledgement as soon as possible.
Payment can than be arranged via PayPal
or bank wire.



Demos:
Video1
Video2
Video3

Vahlbruch Twin Tremolo Boutique Effect Pedal

The Twin-Tremolo is a pure 100% analog, hand-build, two channel tremolo effect pedal, especially designed to offer you authentic sine-wave vintage tremolo sounds like in the 50´s as well as more modern square wave sounds in ONE pedal without knob twisting!

This pedal has two completely independent channels, each consisting of a "speed" and "depth"-control and a hard/soft mini toggle-switch for waveform selection. A pulsating two-color LED (green/red) indicates the tremolo speed and at the same time the selected channel. The channels can be changed via a sturdy foot switch.

The overall "volume" control acts on both channels and allows you to balance the typical psycho-acoustic tremolo volume drop.
 
With the Vahlbruch "Twin-Tremolo" you can now pre-adjust two different speed settings for one identical type of tremolo sound, for example. But you can also set the controls for two completely different tremolo effects like on one channel a soft tremolo sound with reduced depth for a classic trem-vibe and on the second channel a square wave machine gun effect at any speed with the "depth"- control turned to maximum and mini toggle-switch set on "hard". Or you can set  anything in between. You have two channels, the possibilities are endless!!

The pedal can also be used as a buffer and booster with or without tremolo effect. For the latter one simply turn the "depth"-controls to minimum and adjust the volume pot to the desired output level.

You can place the Vahlbruch "Twin-Tremolo" before or after distortion pedals, in front of your amp or in the effect loop.
Please avoid inserting the Twin-Tremolo before a compressor unit, since dynamic compression can influence the tremolo effect in a bad way.

Thanks to its extremely large signal-to-noise ratio the Vahlbruch "Twin-Tremolo" shows almost no background noise and is therefore suited for any studio work and professional live performance.

The pedal has a true bypass switch for perfect signal transfer without any tone loss. A blue LED shows you the on/off status. You can use a 9V battery to power the pedal or an external standard 9V power supply (ring +, tip -). The power consumption is approximately 20mA.

The "Twin Tremolo" pedal has NO pcb-mounted jacks, NO pcb-mounted footswitch and NO pcb-mounted pots! This certainly means more effort building the pedal compared to industrial mass production but it´s truly worth it!
Like all Vahlbruch pedals the "Twin Tremolo" is hand-made utilizing only the best components available worldwide for high-end tone and years of trouble free operation.

100% pure analog - made in Germany.